Help - Motorola L702CBT User Manual

7. HELP

I cannot pair my mobile phone to the telephone
base
• Make sure the Bluetooth function of your Bluetooth
enabled mobile phone is turned on. See the User's
Guide of your mobile phone for more information.
• Make sure the cordless handset, corded base and
mobile phone are located near each other.
• Remove the Motorola L702CBT / L703CBT /
L704CBT / L705CBT from your mobile phone's
Bluetooth device history list (see the User's Guide
of your mobile phone for more information).
• Carefully follow the pairing instructions in the User's
Guide, make sure that your mobile phone is not
connected to any other Bluetooth device(s).
• Turn off your mobile phone, and then turn it on
again.
• Reset the telephone base. Unplug the unit's
electrical power. Wait for approximately 15
seconds, and then plug it back in.
• Repeat the above suggestions.
60
The icon is not scrolling when the cordless
handset is placed on the charger
• Handset not properly seated on the charger -
readjust the handset on the charger.
• Dirty contact - clean the charge contacts by wiping
with an alcohol moistened cloth.
• Battery is full -charging is not necessary at this
time.
No dial tone
• If there is no base power, check the connections.
Reset the phone by unplugging then plugging it
back into an electrical outlet.
• If the cordless handset batteries are empty,
recharge the battery pack for at least 24 hours.
• Move the cordless handset closer to the corded
base.
• Be sure to use only the provided telephone cords.
Poor audio quality
• If the corded base is too close to electrical
appliances, reinforced concrete walls, or metal door
frames, move the corded base from these areas.
No ring tone
• The ringer may be off.
• The volume may need to be increased.
HELP