Setting The Area Code; Resetting All Settings; Using Your Answering Machine; Playing Messages - Motorola L702CBT User Manual

4.23

Setting the area code

1. Press MENU (Base) and then
SETTINGS
.
2. Press MENU (Base) and then
AREA CODE
.
3. Press MENU (Base) and enter the area code.
4. Press MENU (Base) to save the setting.
4.24

Resetting all settings

1. Press MENU (Base) and then
RESET
.
2. Press MENU (Base) and then
ALL SETTINGS
.
3. Press MENU (Base) to select
settings will be reset to default.
NOTE
All of your phonebook entries, calls list and redial list will
remain unchanged after resetting.
USING YOUR PHONE
or to select
or to select
or to select
or to select
YES
. All personalized
4.25

Using your answering machine

4.25.1 Playing messages

1. Press on the corded base from idle mode.
New messages will be played followed by any older
messages.
2. During message playback, press the keys below on
the corded base to perform the following functions:
Press to repeat the current message from
the beginning.
Press twice to play the previous message.
Press to stop the current message
playback.
Press to skip to play the next message.
Press to delete the current message and
X
the next message will be played.
Press to increase the volume.
Press to decrease the volume.
NOTE
When you are on either a cellular call or a home call, the
answering system will not answer the second incoming call.
35