Replacing A Paired Device - Motorola L702CBT User Manual

For an inactive device (not shown in the active devices
list) when there is no free slot in the active devices list
(already two active devices):
5. Press MENU (Base) and then
REPLACE REMOVE
or .
REPLACE
If you select :
6. Press MENU (Base) and then
device on the active list to be replaced.
7. Press MENU (Base) and display will show
ADDED
, and then the telephone will start to connect
the selected cellular device.
REMOVE
If you select :
Follow the steps above.
NOTES
• When the connected cellular is removed,
the corresponding
• When the disconnected cellular is connected,
the corresponding
• When the cellular is removed, the device name will
EMPTY
be removed and
the paired devices list.
BLUETOOTH®
or to select
or to select a
DEVICE
will be off.
or
will be on.
or
will be displayed instead in
3.3.2

Replacing a paired device

If you have already paired up four Bluetooth enabled
mobile devices, you will need to replace one of them if
you would like to pair up another device. Follow the
steps below to replace and pair up a new device.
1. Press MENU (Base) and then
BLUETOOTH
.
2. Press MENU (Base) and then
SETUP CELL
.
CELLS MAX.
3. Display will show 4
4. Press MENU (Base) to confirm. Display will show
the four Cellular names of the paired devices.
5. Press or to select the cellular device you
would like to replace.
6. Press MENU (Base) to confirm. Display will show
REMOVED CELLULAR READY?
, and then
7. Refer to section 3.2 to proceed with the next steps.
NOTE
When pairing up a new cellular, the connected cellular
will be disabled temporarily.
or to select
or to select
REPLACE?
, and then .
.
23