Replacing A Paired Device - Motorola L702CBT User Manual

ADD TO ACTIVE
If you select
Press MENU and display shows
LIST
, and then the telephone will start to connect the
selected cellular device.
REMOVE PAIRED
If you select
Follow the steps above.
For an inactive device (not shown in the active devices
list) when there is no free slot in the active devices list
(already two active devices):
5. Press MENU and then VOL+ or REDIAL/VOL- to
REPLACE ACTIVE
select
REPLACE ACTIVE
If you select
6. Press MENU and then VOL+ or REDIAL/VOL- to
select a device on the active devices list to be
replaced.
7. Press MENU and display shows
ACTIVE LIST
, and then the telephone will start to
connect the selected cellular device.
REMOVE PAIRED
If you select
Follow the steps above.
42
:
DEVICE ADDED TO ACTIVE
:
REMOVE PAIRED
or .
:
DEVICE ADDED TO
:
NOTES
• When the connected cellular is removed, the
corresponding
or
• When the disconnected cellular is connected, the
corresponding
or
• When the cellular is removed, the device name will
EMPTY
be removed and
the paired devices list.
5.2.2

Replacing a paired device

If you have already paired up four Bluetooth enabled
mobile devices, you will need to replace one of them if
you would like to pair up another device. Follow the
steps below to replace and pair up a new device.
1. Press MENU and then VOL+ or REDIAL/VOL- to
BLUETOOTH
select .
2. Press MENU and then VOL+ or REDIAL/VOL- to
SETUP CELLULAR
select
MAXIMUM OF 4 PAIRED DEVICES
3. Display will show
REPLACE A PAIRED DEVICE?
then
4. Press MENU to confirm. Display will show the four
Cellular names of the paired devices.
5. Press VOL+ or REDIAL/VOL- to select the cellular
device you would like to replace.
will be off.
will be on.
will be displayed instead in
.
, and
.
BLUETOOTH®