Setting The Flash Time; Setting The Area Code; Registration; Registering A Cordless Handset - Motorola L702CBT User Manual

6.22

Setting the flash time

The default flash time is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to
SETUP BS
select .
2. Press MENU and then VOL+ or REDIAL/VOL- to
FLASH TIME
select .
3. Press MENU and then VOL+ or REDIAL/VOL- to
the flash time you want. (8 options are available:
100 110 250 300 400 600
, , , , ,
4. Press MENU to save the setting.
6.23

Setting the area code

1. Press MENU and then VOL+ or REDIAL/VOL- to
SETUP BS
select .
2. Press MENU and then VOL+ or REDIAL/VOL- to
AREA CODE
select .
3. Press MENU and enter the area code.
4. Press MENU to save the setting.
54
700MS
and )
6.24

Registration

6.24.1 Registering a cordless handset

Up to 5 cordless handsets can be registered to a corded
base. The original cordless handset is pre-registered to
use. Additional cordless handsets must be registered to
the corded base before you can use them.
To register an additional cordless handset,
1. Press MENU and then VOL+ or REDIAL/VOL- to
SETUP HS
select
2. Press MENU and then VOL+ or REDIAL/VOL- to
90
,
REGISTRATION
select
3. Press MENU and then VOL+ or REDIAL/VOL- to
YES
select or
YES
4. Select and then press MENU to enter the
registration procedure as follows:
1) Press and hold #/
for around 4 seconds on the corded base.
2) Place the unregistered cordless handset on the
charger.
3) A confirmation tone is generated if registration
is successful.
denotes the number of handsets, and then the
phone returns to idle.
To register an originally unregistered cordless handset,
follow steps 1) through 3) above.
.
.
NO
.
/PAUSE/FORMAT/FIND
HANDSET X
is displayed where
USING THE PHONE
X