Three-Party Conference Call; Setting The Dial Mode; Setting The Flash Time - Motorola L702CBT User Manual

4.20.3 Three-party conference call

1. During an external home call, press MENU (Base).
Your call will be put on hold.
2. Press or to select the cordless handset you
want to call.
3. Press MENU (Base) to call the cordless handset.
4. When the cordless handset answers the intercom
call, press MENU (Base) on the corded base to join
the conference call.
5. Press /HOME on the corded base or put the
corded handset on the base cradle to end a three-
party conference call and leave the cordless
handset engaged with the caller.
NOTE
During an external home call on the base, pressing
/HOME or /SPEAKER on any other cordless
handset will join the call and set up a conference call.
4.21

Setting the dial mode

The default dialing mode is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
1. Press MENU (Base) and then
SETTINGS
.
34
2. Press MENU (Base) and then
3. Press MENU (Base) and
4. Press MENU (Base) to save the setting.
NOTE
If pulse mode is selected, press */TONE to switch from
pulse to tone dialing temporarily when dialing out. After
the call is ended, the dial mode will change back to
pulse automatically.
4.22
The default flash time is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
1. Press MENU (Base) and then
2. Press MENU (Base) and then
3. Press MENU (Base) and then
4. Press MENU (Base) to save the setting.
or to select
DIAL MODE
.
PULSE
or .

Setting the flash time

SETTINGS
.
FLASH TIME
.
flash time you want. (8 options are available:
100MS 110MS 250MS 300MS
, , ,
or to select
TONE
or to select
or to select
or to select
or to the
90MS
400MS 600MS 700MS
, , , and )
USING YOUR PHONE
,