Advanced Settings; Set The Dial Mode; Set The Flash Time; Set The Area Code - Motorola K301 User Manual

7. Advanced Settings

7.1

Set the Dial Mode

The default dialing mode is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
P ,
1. Press and to select
P
DIAL MODE
2. Press to select
P ,
3. Press and to select
P
4. Press to save.
NOTE
If pulse mode is selected, press
tone dialing temporarily when dialing out. After the call is
ended, the dial mode will change back to pulse.
7.2

Set the Flash Time

The default flash time is 600MS. It is unlikely that you should
need to change this setting unless advised to do so.
P ,
1. Press and to select
P ,
2. Press and to select
Advanced Settings
SETUP BS
.
.
TONE PULSE
or .
*
to switch from pulse to
SETUP BS
.
FLASH TIME
.
P ,
3. Press and to the flash time you want. (8
90
options are available:
700MS
)
P
4. Press to save.
7.3

Set the Area Code

P ,
1. Press and to select
P ,
2. Press and to select
P
3. Press and enter the area code.
P
4. Press to save.
7.4

Reset All Settings

All personalized settings will be reset to default. Phonebook
entries, calls list, redial list and numbers stored in the
memory will remain unchanged.
P ,
1. Press and to select
P ,
2. Press and to select
P
YES
3. Press to select
P
4. Press to reset all settings to default.
100 110 250 300 400 600
, , , , , , and
SETUP BS
.
AREA CODE
.
RESET SETTINGS
.
ALL SETTINGS
.
.
27