User’s Guide DECT 6.0 Digital Cordless Phone with Answering machine Models: P1001, P1002, P1003, P1004, P1005 Warning Use only the adapter and telephone line cord provided in the box. The features described in this User’s Guide are subject to modifications without prior notice.
Motorola Phone! Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
This User’s Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. Follow the simple instructions in 'Getting Started', on the next few pages. IMPORTANT Only use the telephone line cord supplied.
Table of contents 1. Getting started ..................6 Connecting the base .................. 7 Wall mounting on the base ................. 7 Installing and charging the handset battery pack ........8 Setting the display language ..............9 Setting the date and time................9 2.
3.21.3 Setting the announcement mode ..........24 3.21.4 Setting the number of rings ............24 3.21.5 Announcement .................24 3.21.6 Recording a memo ..............25 3.21.7 Call screening on/off ..............25 3.21.8 Deleting all old messages ............25 3.21.9 Remote access ................26 3.21.10 Setting the security code ............
1. Getting started WARNING Do not place your phone in the bathroom or other humid areas. Location When choosing a location for your new phone, here are some important guidelines you should consider: • Avoid sources of noise and heat, such as motors, fluorescent lighting, microwave ovens, heating appliances and direct sunlight.
Connecting the base 1. Plug the power adapter and the telephone line cord into the base. The power adapter with the bigger pin is for the charger (only in multi- handset packs). 2. Plug the other end of the power adapter into a power outlet and the telephone line cord into a telephone wall jack.
3. Plug the other end of the power adapter into a power outlet and the telephone line cord into a telephone wall jack. 4. Align the mounting slots on the base with the mounting posts on the wall. Then push in and down until the phone is firmly seated. NOTE DO NOT use a power outlet controlled by a wall switch.
Setting the display language 1. Press MENU then VOL+ or REDIAL/VOL- to select SETUP 2. Press MENU then VOL+ or REDIAL/VOL- to select LANGUAGE. 3. Press MENU then VOL+ or REDIAL/VOL- to select the desired language. 4. Press MENU to save. Setting the date and time 1.
2. Getting to know your phone Overview of your cordless handset SCROLL UP / VOLUME UP a) In menu mode: Press to scroll up. b) In editing mode: Press to move cursor to the left. c) During a call: Press to increase volume. d) Calls list / phonebook / redial list entry: Press to scroll up the list.
TALK OFF / BACK a) In menu / editing mode: Press to exit to previous level. b) In pre-dial mode / phonebook / calls list / redial list entry / answering machine mode: Press to exit to idle. c) During a call: Press to end a call. SKIP FORWARD a) During message playback: Press skip to play the next message.
12 * / TONE a) In idle / pre-dial / editing mode: Press to insert a *. b) During a call: Press to switch from pulse to tone dialing temporarily if pulse mode was selected before. After the call has ended, the dial mode will change back to pulse.
Cordless Handset LCD display Display Icons On when speakerphone is turned on. On when answering machine is turned on. Flashes when new answering machine message is received. Indicates when new call is received. Off when new call has been viewed. On when ringer volume is turned off.
On when the line is in use. Flashes when there is an incoming call. In idle mode the current date is displayed. In Caller ID mode, the date of the call is displayed. Overview of the base CHARGING LED - GREEN a) On when the handset is put into base cradle for charging.
Base LED Indicators Answering machine is OFF. There is no voice message in the answering machine. Flash in idle: Indicates the number of new answering machine messages. (e.g. there are 9 answering machine messages in total, with a capacity for 59.) Flash during message playing: The selected new answering machine message is being played.
3. Using the Phone Making a call 1. Enter the phone number then press /FLASH or / SPEAKER to dial the phone number. Speed dialing 1. In idle mode, press and hold a key from /1 to WXYZ/9 until the number is displayed and dialed.
Adding an entry to the phonebook 1. In idle mode, press 2. Press MENU and then VOL+ or REDIAL/VOL- to select ADD. 3. Press MENU and then enter the name. 4. Press MENU and then enter the number. 5. Press MENU to save. NOTE Numbers can be up to 24 digits long and names up to 15 characters long.
NOTE • If the telephone number is not available for incoming calls, the handset will display UNAVAILABLE. • If the incoming call is from a withheld telephone number, the handset will display PRIVATE. • Information about incoming calls will vary by country and network operator. Some operators may charge a subscription for their Caller ID service.
3.12.3 Saving a number from the calls list to the phonebook 1. Press CID to enter the calls list. 2. Press VOL+ or REDIAL/VOL- to select the entry you want. 3. Press MENU and then enter the name if desired. 4.
1. Press MENU. 2. Press VOL+ or REDIAL/VOL- to scroll through the menu. 3. Press MENU for opening sub-menus and/or saving. Press /BACK to go back to the previous menu level or cancel an action. If you do not press any button on the handset for 30 seconds, the display will automatically return to standby.
3.14.3 Three-party conference call 1. During an external call, press INT. - Your caller is put on hold. 2. Press VOL+ or REDIAL/VOL- to select the handset you want to call. 3. Press MENU to call the handset. 4. When the other handset answers the intercom call, press MENU on the calling handset to set up the conference call.
3.17 Setting the area code 1. Press MENU and then VOL+ or REDIAL/VOL- to select SETUP 2. Press MENU and then VOL+ or REDIAL/VOL- to select AREA CODE. 3. Press MENU and then enter the area code. 4. Press MENU to save. 3.18 Registration The original handset is pre-registered to use.
3.21 Using your answering machine 3.21.1 Playing messages 1. Press on the handset from idle mode. New messages will be played followed by any older messages. 2. During the message playback, press the keys below on the handset to perform the following functions: Press to playback or stop playing messages Skip to play the next message Press to repeat the current message from the beginning.
3.21.3 Setting the announcement mode 1. Press MENU and then VOL+ or REDIAL/VOL- to select ANSWER MACHINE. 2. Press MENU and then VOL+ or REDIAL/VOL- to select ANSWERER MODE. 3. Press MENU and then VOL+ or REDIAL/VOL- to select the announcement modes: •...
22.214.171.124 Playing the announcement 1. Press MENU and then VOL+ or REDIAL/VOL- to select ANSWER MACHINE. 2. Press MENU and then VOL+ or REDIAL/VOL- to select ANNOUNCEMENT. 3. Press MENU and then VOL+ or REDIAL/VOL- to select PLAY. 4. Press MENU and then VOL+ or REDIAL/VOL- to select the answer mode ANNC &...
NOTE When the answering machine is full, will flash if there are new messages. ERASE SOME ANSWERER MSG will toggle within 2 seconds with MEMORY FULL. At this point, delete some messages to free up memory. 3.21.9 Remote access Remote access allows you to operate your answering machine and listen to your messages by calling your phone from another phone.
4. Help icon is not scrolling when the handset is placed on the base • Handset not properly seated on the base cradle - readjust the handset on the base. • Dirty contact - clean the charge contacts by wiping with an alcohol moistened cloth.
No display • Try recharging or replacing the rechargeable battery pack. • Reset the base. Unplug the unit's electrical, then plug it back in. • If the LED is not lit up, then try to unplug the unit's electrical power, and then plug it back in.
5. General information If your product is not working properly... 1. Read this User’s Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service in the US and Canada at 1-888-331-3383. To order a replacement battery pack contact customer service or visit our website.
Unplug this cordless phone immediately from an outlet if: • The power cord or plug is damaged or frayed. • Liquid has been spilled on the product. • The product has been exposed to rain or water. Do not retrieve the handset or base until after you have unplugged the power and phone from the wall.
Contact your local recycling center for proper disposal methods. SAVE THESE INSTRUCTIONS Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE"). What Does this Warranty Cover? Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product ("Product") or certified accessory ("Accessory") sold...
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING...
(c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or BINATONE., are excluded from coverage.
(b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage.
FCC, ACTA and IC regulations FCC Part 15 This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation.
FCC Part 68 and ACTA This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US: AAAEQ##TXXXX.
inform you of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone company is required to notify you if such changes are planned. If this product is equipped with a corded or cordless handset, it is hearing aid compatible.
Technical Specifications RF frequency band 1921.536 MHz -1928.448 MHz Channels Operating temperature 5ºC to 45ºC Telephone base Voltage 96 — 130 Vms (AV voltage, 60Hz) Telephone base 6VDC, 400 mA voltage(Adapter output) Handset voltage 2.4V 500mAh Ni-MH battery pack Charger voltage (Adapter 6V AC, 300mA for Handset Charger output) General information...