Grandstream Networks GXP-280 User Manual page 30

Enable XML Idle Screen download via TFTP or HTTP. Define XML server path.
Idle Screen XML
Download
Enter server path for XML application. This option applies to GXP-2020 only.
XML
Application
To configure a User ID/extension to dial automatically when the phone is taken offhook.
Offhook Auto
Dial
This parameter sets the payload type for DTMF using RFC2833. Default is 101.
DTMF Payload
Type
It determines the time handset has to be down to be recognized it's onhook. Default is
Onhook
800ms. For GXP280 only.
Threshhold
The IP address or URL of System log server. This feature is especially useful for ITSPs.
Syslog Server
Select the ATA to report the log level. Default is NONE. The level is one of DEBUG,
Syslog Level
INFO, WARNING or ERROR. Syslog messages are sent based on the following events:
The Syslog uses USER facility. In addition to standard Syslog payload, it contains the
following components: GS_LOG: [device MAC address][error code] error message
For example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000].
Ethernet link is up.
This parameter defines the URI or IP address of the NTP (Network Time Protocol) serve.
NTP server
It is used to display the current date/time.
Caller ID must be configured. Select a Distinctive Ring Tone 1 through 3 for a particular
Distinctive Ring
Caller ID. The GXP will ONLY use selected ring tones for particular Caller IDs. For all
Tone
other calls, the GXP will use System Ring Tone. When selected and no Caller ID is
configured, the selected ring tone will be used for all incoming calls.
System ring tone. Default is North American standard.
System Ring
Adjust system ring tone frequencies and cadences based on local telecom standard.
Tone
Grandstream Networks, Inc.
•
product model/version on boot up (INFO level)
•
NAT related info (INFO level)
•
sent or received SIP message (DEBUG level)
•
SIP message summary (INFO level)
•
inbound and outbound calls (INFO level)
•
registration status change (INFO level)
•
negotiated codec (INFO level)
•
Ethernet link up (INFO level)
•
SLIC chip exception (WARNING and ERROR levels)
•
memory exception (ERROR level)
GXP User Manual
Firmware 1.1.6.46
Page 30 of 39
Last Updated: 03/2008