Avocent CYCLADES ACS 6000 Installation & Administrators Manual page 89

81
Cyclades™ ACS 6000 Advanced Console Server Installation/Administration/User Guide
Command
ATB0
ATB1
ATD
ATD0-9
ATDA-D
ATDP
ATDT
ATD!
ATDW
ATD@
ATD,
ATD;
ATE0
ATE1
ATH0
ATH1
ATI0
ATI2
ATI3
ATL0
ATL1
ATL2
ATL3
ATM0
Description
CCITT operation at 300 or 1200 bps.
Bell operation at 300 or 1200 bps (default).
Dial.
Dial the DTMF digits 0 to 9.
Dial the DTMF digits A, B, C and D.
Select pulse dialing; effects current and subsequent dialing.
Select tone dialing; effects current and subsequent dialing.
Flash: go on-hook by time defined by S29.
Wait for dial tone detection before dialing a number. If no dial tone is detected
within the time specified by S7, the modem aborts the rest of the sequence, goes
on-hook and generates an error message.
Wait for five seconds of silence before proceeding with next dialing string and then
complete handshake sequence.
Pause. The modem pauses for a time specified by S8 before dialing the number.
Most often used when dialing an outside line through a PBX.
Return to the command mode after processing the command.
Disables the command echo.
Enables the command echo (default).
Hang up.
Forces the modem off-hook.
Reports product code.
Reports OK (for software compatibility).
Reports the firmware version of the modem. Example: CX810801-V90.
Sets the speaker volume off.
Sets the speaker volume low (default).
Sets the speaker volume medium.
Sets the speaker volume high.
Speaker is always off.