Avocent CYCLADES ACS 6000 Installation & Administrators Manual page 46

38 Cyclades™ ACS 6000 Advanced Console Server Installation/Administration/User Guide
6. Click Next or click the Alerts link.
a. Click Enable Alerts to enable detection of alerts.
b. Click Add to add an alert string. Enter the string in the Alerts String field and click
Next to return to the Alerts screen.
c. Check the box next to an existing alert and click Delete to delete the string.
d. Click Delete Any to delete all strings whether selected or not.
NOTE: Clicking Delete Any will delete all alert strings. Selecting all the alert strings and clicking Delete is not the
same functon as it will not delete alert strings not shown in the table.
7. Click Next or click the Power link.
a. Click Add to add a new outlet. Click Selected PDU and select a PDU from the list of
detected PDUs. Enter the outlet(s) in the Outlets field, and click Next.
b. Check the box next to an existing merged outlet and click Delete to delete it.
NOTE: Power is only available when a single serial port is selected.
8. Click Save.
Table 3.5: CAS Profile Parameters
Parameter
Physical
Enable Cisco RJ-45
Pin-Out
Status
Speed
Parity
Data Bits
Stop Bits
Flow Control
CAS
Description
Defines the serial port pinout. Default: Disabled.
Defines the status of the serial port as either enabled or disabled.
Default: Disabled.
Defines the speed as 300, 1200, 2400, 4800, 9600, 19200, 38400,
57600, 115200 or 230400. Default: 9600.
Defines the parity as either Even, Odd or None. Default: None.
Defines the data bits as either 5, 6, 7 or 8. Default: 8.
Defines the stop bits as either 1 or 2. Default: 1.
Defines the flow control as none, hardware, software, RxON software
or TxON software. Default: None.