Avocent CYCLADES ACS 6000 Installation & Administrators Manual page 67

Command
-e <[^]char>
-l
-ro
<portname>
-t
To add access to serial ports for a user group:
1. Click Users - Authorization - Groups.
2. Click the new user group name.
3. In the side navigation bar, click Access Rights.
4. In the content area, click Add.
5. Move serial target devices from the Available Target box on the left to the box on the right
by double-clicking on the serial target name, or by selecting the target and clicking the
Add button. You can remove any targets from the box on the right by double-clicking on
the target or by selecting the target and clicking the Remove button.
6. Select the desired access rights.
7. Click Save. The Serial screen will appear and show the serial target devices you have
authorized for use by the user group with configured permission(s).
8. Edit the access rights by selecting the checkbox next to one or more of the target names in
the list as needed and click Edit. The Target Access Rights screen is displayed with the
access rights. Select the desired access rights and click Save.
To assign PDU access for a user group:
NOTE: Assigning PDU access to a user group gives them full access to all power management functions for that
PDU. If you want the user group to have access to outlets only, use the procedure To assign outlet access for a new
custom user group below.
1. Click on Users - Authorization - Groups.
2. Click on the user group name.
3. In the side navigation bar, click Access Rights - Power.
Chapter 3: Accessing the Console Server via the Web Manager
Description
Escape character used to close the target session. Default
Ctrl-X
value:
Sorted lists ports and exit
Read-Only mode
Connect directly to a serial port
Idle time-out in seconds to choose the target
59