Mounting Bracket - Regency THE INDOOR/OUTDOOR FAN Owner's Manual

P
REPARATION
Parts identification on assembled fan
P P : :
R R E E P P A A R R A A T T I I O O N N
Verify that you have all parts before beginning the installation. Check foam insert closely for missing parts. Remove motor from
packing. To avoid damage to finish, assemble motor on soft padded surface or use the original foam inset in motor box. Do not
lay fan on its side as this could result in shifting of motor in decorative enclosure.
I
NSTALLING THE
C C a a u u t t i i o o n n : :
To avoid possible electrical shock, be sure elec-
tricity is turned off at the main power box before wiring. All
wiring must be in accordance with National and Local
Electrical Codes and the ceiling fan must be grounded as a
precaution against possible electric shock.
1. Locate ceiling area where fan is to be mounted, being sure
location agrees with the requirements in the minimum
clearance section of this guide. Mounting area must be
sound and of adequate size to support 35 lbs. (p. 1, #3
and #4)
2. If not already present, mount a UL listed outlet box
marked "suitable for fan support" following the instruc-
tions provided with the outlet box. The outlet box must
be able to support a minimum of 35 pounds.
3. Attach hanger bracket to outlet box using screws pro-
vided with the outlet box.
Fan Housing
Blade
Blade Arm
Glass Shade
M B
OUNTING RACKET
Canopy
Downrod
Ceiling Fan
Outlet Box
Hanger
Bracket
Flat Washer
Spring Washer
Outlet Box
Screw
4