U
Y
NPACKING
OUR
1. Unpack your fan and check the contents. Do not discard the carton. If warranty replacement or repair is ever necessary,
the fan should be returned in original packing. Remove all parts and hardware. Do not lay motor housing on its
side, or the decorative housing may shift, be bent or damaged.
2. Examine all parts. You should have the following:
1
2
3
11
7
1. Mounting bracket
2. Ceiling canopy
3. Downrod/ball assembly
4. Fan housing with motor and blade arms
5. Shade
6. Fan blades (5)
7. Bracket hardware (wood screws, washers,
wire nuts)
F
AN
8
4
5
MED
REV
9
OFF
8. Blade arm to blade screws w/washers
9. Downrod pin and cotter pin
10. Remote control transmitter and receiver w/wall holster
11. Light bulb (100W "J" type)
Recommended for uplight:
Four candelabra base (E12) 40W bulbs (not included)
3
10
6