Table of Contents
Advertisement
P
REPARATION
Parts identification on assembled fan
PREPARATION:
Verify you have all parts before beginning the installation. Check foam insert closely for missing parts. Remove motor
from packing. To avoid damage to finish, assemble motor on soft padded surface or use the original foam inset in motor
box. Do not lay motor housing on its side as this could result in shifting of motor in decorative enclosure.
Do not lay motor housing on its side as this could result in shifting of motor in decorative enclosure.
I
NSTALLING THE
Caution
Caution: To avoid possible electrical shock, be sure elec-
tricity is turned off at the main power box before wiring.
All wiring must be in accordance with National and Local
Electrical Codes and the ceiling fan must be grounded as a
precaution against possible electric shock.
1. Locate ceiling joist where fan is to be mounted, being
sure location agrees with the requirements in the mini-
mum clearance section of this guide. Wood joist must be
sound and of adequate size to support 35 lbs. (See Page 1,
Items 3 and 4).
2. If not already present, mount a UL listed outlet box
marked "suitable for fan support" following the instruc-
tions provided with the outlet box. The outlet box must be
able to support a minimum of 35 pounds.
3. Attach hanging bracket to outlet box using screws pro-
vided with the outlet box.
Canopy
Downrod
Blade Arm
Blade
H
B
ANGING
RACKET
Collar Cover
Motor Housing
Detachable
Switch
Housing
Ceiling Fan
Outlet Box
Hanger
Bracket
Flat Washer
Spring Washer
Outlet Box
Screw
Fig. 1
4
Advertisement
Table of Contents
