Menu Selections - Brady LABXPERT User Manual

Step 2. Press [NEXT] to advance to the next set of menu choices:
Pressing [NEXT] again cycles back to the first set of menu choices when the last menu choice is
reached.
Step 3. Press [CLEAR/ESC] to either back up to the
previous menu level, or exit menu mode and
return to the display screen.

Menu Selections

To perform types of formatting, press [MENU] and the corresponding softkey. Following is a list of
the high-level menu selections and the corresponding softkey:
Menu Selection
Vial – Choose from available sizes of .6 ml, 1.5 ml, 1.8 ml, 2-4 ml.
15 ml, and 50 ml, and AUTO.
Note: To clear a previously set vial size, select AUTO from the Vial
menu.
Continuous – Choose AUTO for label length that is determined by
font size and characters entered, LEN (length) to enter specific
length, or SEP (separator) to enter option of NONE, TIC, or LINE.
Justify – Set horizontal and vertical justification of legend.
Rotate – Set rotation of legend to 0, 90, 180, or 270 degrees.
Units – Change units (to inches, millimeters, or points) for displaying
label and font sizes.
Barcode – Add Code 39 or Code 128 barcodes.
Set Time – Set the time to print a real-time stamp on your label.
Set Date – Set the date to print a real-time date stamp on your label.
Language – Change the default language.
See Appendix A , Menu Tree for a listing of submenus related to each section.
10
Softkey
[VIAL]
[CONT]
[JUST]
[ROT]
[UNIT]
[BAR]
[TIME]
[DATE]
[LANG]
User's Manual