Table of Contents
Advertisement
GENERAL SAFETY PRECAUTIONS
FOR OPERATING MACHINERY
As with all machinery, there are certain hazards involved with their operation and
use. Exercising respect and caution will considerably lessen the risk of personal
injury. However, if normal safety precautions are overlooked or ignored, personal
injury to the operator or damage to machinery may result.
1.
KNOW YOUR MACHINE. Read the manual carefully. Learn the machines appli-
cations and limitations, as well as the specific potential hazards peculiar to it.
2.
KEEP GUARDS IN PLACE and in working order.
3.
EARTH ALL MACHINES. If the machine is equipped with three-pin plug, it should
be plugged into a three-pin electrical socket. Never remove the earth pin.
4.
REMOVE ALL ADJUSTING KEYS AND WRENCHES. Form the habit of checking to
ensure that keys, wrenches and tools, are removed from the machine.
5.
KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
6.
DON'T USE IN DANGEROUS ENVIRONMENT. Don't use machinery in damp or
wet locations, or expose them to rain. Keep work area well lit.
7.
MAKE WORKSHOP CHILDPROOF - with padlocks, master switches or by removing
starter keys.
8.
KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a
safe distance from work area
9.
DON'T FORCE THE MACHINE. It will do the job better and safer, at the rate for
which it was designed.
10. USE THE RIGHT TOOL. Don't force a tool or attachment to do a job for which it
was not designed.
11. WEAR PROPER APPAREL. Loose clothing, gloves, neckties, rings, bracelets, or
other jewellery may get caught in moving parts. Nonslip footwear is
recommended. Long hair should be contained.
12. USE SAFETY GLASSES. Everyday eyeglasses only have impact resistant lenses,
they are NOT safety glasses.
13. DON'T OVERREACH. Keep proper footing and balance at all times.
14. MAINTAIN TOOLS IN TOP CONDITION. Keep tools sharp and clean for best and
safest performance. Follow instructions for lubricating and changing
accessories.
15. ALWAYS DISCONNECT THE MACHINE before servicing or changing accessories.
16. AVOID ACCIDENTAL STARTING. Switch Machine OFF before plugging in.
17. CHECK FOR DAMAGE. If any part of the machine, (eg. A cover or guard) is
damaged, it should be carefully inspected to ensure that it can perform its
intended function correctly. If in doubt, the part should be renewed. Damage to
moving parts or major components should be Inspected by a qualified technician
before operating the machine. Contact your local dealer for advice.
5
Advertisement
Table of Contents
