Timing Specification - Toshiba teli BG030 Instruction Manual

Timing Specification

Image data outputs of this camera series are transferred with the UDP protocol of Gigabit Ethernet. Timing
numerical value below is prescribed by absolute prerequisite that BG series use transmission band without
restriction of other node. When there is a node transferring with BG series concerned, it is not same the
numerical value prescribed below.
● Image Stream Output (normal shutter)
Expose
GbE bus
Model
BG030
BG031
BG080
BG130
BG202
BG030C
BG130C
T : GVSP_BLOCK_START_DELAY
DLY1
T : SCPD(Stream Channel Packet Delay)
DLY2
*
B/W model: T = 100µs or longer, Color model: T
1
PayloadSize is total bytes of single frame.
The formula applies when SCPS (Stream Channel Packet Size) is 1500 byte / packet.
(T1 varies depending on the value of SCPS)
Copyright © 2012 - 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Image
T1 T
DLY1
T1 [ms] T2 [ms]
see following same as
formula. Frame Rate.
,
= 250µs or longer
1
27 / 85
Image
T2
T
DLY2
T2
Default Framerate [ms]
8.0
8.0
25.0
33.3
50.0
8.3
33.3
http://www.toshiba-teli.co.jp/index.htm
Image
D4211908E