Toshiba teli BG030 Instruction Manual page 54

● Setting
- Selects exposure control mode
Set the following value to "ExposureMode" register. Setting value is Enumeration type.
In Normal Shutter mode, the exposure time is determined by "ExposureTime" register value regardless of
"ExposureMode" register setting.
- Sets exposure time (timed mode only)
Set the following value to "ExposureTime" register. Setting value is Float type.
Set the exposure time of Normal Shutter mode, and Random Trigger Shutter -Timed mode operation.
Model
ExposureTime (*)
ExposureTimeMin
ExposureTimeMax
- Set auto exposure
Set the following value to "ExposureAuto" register. Setting value is Enumeration type.
Select the exposure control.
● Note
Changing "ExposureMode" register value is invalid during image stream data output.
Copyright © 2012 - 2013 TOSHIBA TELI CORPORATION, All rights reserved.
setting value Manual exposure mode
Timed (*) "ExposureTime" register control
TriggerWidth Trigger pulse width control
BG030/
BG031
BG030C
8000 [µs] 8000 [µs]
10 [µs] 10 [µs]
setting value
Off (*) Manual Exposure control
On Auto Exposure control
53 / 85
* initial factory setting
BG130/
BG080
BG130C
25000 [µs] 33333 [µs]
30 [µs] 30 [µs]
16000000 [µs]
function
* initial factory setting
http://www.toshiba-teli.co.jp/index.htm
BG202
50000 [µs]
30 [µs]
* initial factory setting
D4211908E