Gain
This section describes Gain control of AnalogControl category for the BG series.
This control adjusts the gain of the image.
This camera series provides two kinds of Gain control mode.
- ManualControl (MANUAL) : The Gain value is determined by "Gain" register setting value.
- AutoGainControl (AGC)
● Registers
Register
GainSelector
Gain
GainAuto
Copyright © 2012 - 2013 TOSHIBA TELI CORPORATION, All rights reserved.
: The Gain value is adjusted automatically by the photometry of the image.
Visibility
Access
Beginner
R
Returns the luminance component of Gain setting.
Beginner
R/W
Sets the absolute Gain.
Beginner
R/W
Sets activation of AGC mode.
Fig. Gain
Description
61 / 85
D4211908E
http://www.toshiba-teli.co.jp/index.htm