● Setting
- Select ColorCorrectionMatrix
Select row and column elements of color correction matrix in "ColorCorrectionMatrixSelectorI" and
"ColorCorrectionMatrixSelectorJ" register.
- Set ColorCorrectionMatrix
Set a color correction matrix coefficient to the element selected by "SelectorI" and "SelectorJ".
Setting value is Float type. Coefficients of (SelectorI, SelectorJ)=(R,R),(G,G),(B,B) are internally fixed to
1.0 and read out data is always 0.0.
● Note
ColorCorrectionMatrix control is available in following PixelForamt modes.
RGB8, YUV411_8, YUV422_8
Copyright © 2012 - 2013 TOSHIBA TELI CORPORATION, All rights reserved.
ColorCorrectionMatrixSelector
I
J
ColorCorrectionMatrix
Minimum
Maximum
Value
R / G / B
R / G / B
* initial factory setting = R
Value
-1.0
+1.0
* initial factory setting = 0.0
72 / 85
D4211908E
http://www.toshiba-teli.co.jp/index.htm