Table of Contents
Advertisement
Timing Specification
Image data outputs are transferred with the UDP protocol of Gigabit Ethernet. Timing numerical value below
is described by absolute prerequisite that camera can use transmission band without restriction of other node.
When there is other node using the same network, the value described below is not guaranteed.
● GbE bus transfer timing (at all pixels readout)
Model Name
BG040M/BG040MCG
BG160M/BG160MCG
* T
DLY1
* T
DLY2
BlockStartDelay and SCPD are able to be controlled by application software.
* Depending on Frame Rate and PacketSize setting, T
SCPD=0.
* Timing chart is at the time of 1000BASE-T connection.
Copyright © 2019 - 2021 Toshiba Teli Corporation, All Rights Reserved.
DLY1
Image stream output
T1 [ms]
Maximum frame rate (in [ms])
of operating mode.
: BlockStartDelay
: SCPD (Stream Channel Packet Delay)
DLY2
Default Frame Rate [ms]
might be inserted automatically despite
DLY2
27 / 156
3.43
13.7
D4288264E
https://www.toshiba-teli.co.jp/en/
Advertisement
Table of Contents
