Console Keys - Diamondback 910Sr Owner's Manual

RPM
RPM or revolutions‐per‐minute. A revolution is defined as one complete foot rotation. RPMs are the number of complete
rotations a single foot completes in sixty seconds.
Scrolling Messaging Display
CONSOLE KEYS
GO / QuickStart Key
From the Idle, Banner or Demo modes press the GO/QuickStart key to immediately launch the QuickStart program and
bypass data entry. Pressing the GO/QuickStart key in the Setup mode will launch the displayed program.
STOP Key
Pressing the STOP key during the Program Run mode will pause the unit for five (5) minutes. Pressing the STOP key twice
will end the current program, post the Workout Summary and return the unit to the Idle mode. Pressing the STOP key
consistently for two seconds will reset the unit, erase all user‐entered data and return the console to the Idle mode.
UP & DOWN Arrow Keys
The UP and DOWN arrow keys are the primary method for adjusting values in the setup modes. During the Program Setup
mode, the UP/DOWN keys will adjust Age, Weight and Time entries. During the operation of a workout program, the UP
and DOWN keys will adjust the resistance level or target heart rate setting.
The Distance, Calories, Speed & RPM fields also serve as a messaging center. During the
user and console setup modes, information will post or scroll information and instructions
to aid the user.
910Sr Owner's Manual
21