Starting And Stopping The Treadmill Safely - True ES900 Owner's Manual

Chapter 1: Safety Instructions
GROUNDING INSTRUCTIONS (continued)
• The 120-V model is for use on a nominal 120-V circuit and has a grounding plug that looks like the plug illustrated
in figure A. Make sure the product is connected to an outlet having the same configuration as the plug. No adaptor
should be used with this product.
• The 230-V model is for use on a circuit having a nominal rating more than 120-V and is factory-equipped with
a specific electric cord and has a grounding plug that looks like the plug illustrated in figure B. Make sure that the
product is connected to an outlet having the same configuration as the plug in Figure B. No adapter should be used
with this product. If the product must be reconnected for use on a different type of electric circuit, the reconnection
should be made by qualified service personnel.

STARTING AND STOPPING THE TREADMILL SAFELY:

Place your feet on the straddle covers.
Attach the safety key to your waistband.
Place the magnetic end of the safety key on the key holder.
IMPORTANT: To prevent unauthorized use, remove safety key and safety clip after your workout and store it in a safe
place. The treadmill cannot operate unless the magnetic safety key is attached to key holder.
Set up your workout and press START.
Stop the treadmill by reducing speed to 2 mph or less, then press STOP.
8
truefitness.com / 800.426.6570 / 1.636.272.7100