Wpan Connection - Datalogic J Series User Manual

2
2.3

WPAN CONNECTION

Datalogic J Series™ PDAs can communicate with a Bluetooth
printer, within a range of 10 m, using the on-board Bluetooth
A
Key:
A) Datalogic J Series™ PDA
B) Bluetooth® printer
In order to avoid wasting energy, the Bluetooth® module is off by
default. If you need to have Bluetooth® working, the module must be
powered on using the Wireless Communications applet (see par.
3.8.4), and perform the Discovery procedure (see par. 3.9.2).
NOTE
The Blue LED flashing signals that the Bluetooth® module is on.
Suspending the terminal powers off the Bluetooth® radio and drops
the piconet (Bluetooth® connection). When the terminal resumes, it
takes approximately 10 seconds for the Bluetooth® radio driver to re-
initialize the radio.
NOTE
14
DATALOGIC J SERIES™
®
device, such as a
®
module.
B