Usb Direct Connection - Datalogic Memor 11 User Manual

CONNECTIONS
USB CONNECTION

USB Direct Connection

You can use the USB Type-C cable included in the box to directly connect the Memor 11
to a host computer and transfer data through the USB interface.
1. Turn on the Memor 11.
2. Turn on the host computer.
3. Connect the device to the host PC via USB cable.
4. Scroll down the notification bar, tap the charging notification and change to
5. The device is now visible in your PC as a USB disk. You can start the data transfer.
Host Computer
Transfer.
NOTE: Connection through the cable complies to USB Type-C standard.
Memor 11
USB Type-C cable
USER'S MANUAL
File
83