Table of Contents
Advertisement
CONNECTIONS
Wi-Fi module is on by default. In order to avoid wasting energy, you can
switch it off using the Wireless Communications applet (see par. 3.8.4).
To start configuring your WLAN connection, tap the Wi-Fi icon at the
bottom of the screen.
NOTE
Suspending the terminal powers off the 802.11b/g radio and drops
the radio connection. When the terminal resumes, depending on the
radio power mode and security protocol selected, it takes
approximately from 10 to 30 seconds for the 802.11b/g radio driver to
NOTE
re-associate the radio to the network.
Area
environmental conditions, access points types or interference caused
by other devices (microwave ovens, radio transmitters, etc.)
NOTE
coverage
and
radio
performance
may
2
vary,
due
to
13
Advertisement
Table of Contents
