Connections; Rs232/Usb Direct Connection - Datalogic J Series User Manual

CONNECTIONS

2 CONNECTIONS
2.1

RS232/USB DIRECT CONNECTION

You can use a cable to connect the Datalogic J Series™ PDA to a host computer to
transfer data.
Key:
A Host computer
B Datalogic J
PDA
* Recommended Power Supply: PG12-10P35 AC/DC Power Supply
If the PDA supports Windows Mobile, before plugging the RS232
cable you have to check the 'COM1 Enable' option on the 'System
Configuration'
Configuration).
CAUTION
USB communication may not be completely guaranteed while
batteries are simultaneously in charge. Avoid the power supply
CAUTION
connection when the USB link is active.
C RS232 cable or USB cable
Series™ D *Power Supply
window.
(only necessary for battery charging)
(Start -> Programs
2
-> System
11