Cleaning The Pda - Datalogic J Series User Manual

4
In order to guarantee an adequate operating autonomy, when
replacing the battery pack the PDA checks the battery energy level.
If the battery is not sufficiently charged, Datalogic J Series™ does
not turn on (when pressing the ON button).
In this case, either substitute the battery pack with a charged one
NOTE
(sufficiently charged) or insert Datalogic J Series™ into a powered
cradle or plug it into the direct power supply.
To achieve the best battery life, turn off the radios not in use.
NOTE
4.3

CLEANING THE PDA

Periodically clean the Datalogic J Series™ PDA with a slightly dampened cloth.
Do not use alcohol, corrosive products or solvents.
88
DATALOGIC J SERIES™