Bully Dog GT Owner's Manual page 52

OperATION
step 5:
COmmUNICATION pROTOCOl
The GT will automatically determine the correct communication protocol to communicate with
the vehicle. This step simply ensures that the GT is properly communicating with the vehicle.
To continue to step 6 simply press the "Next," button.
step 6:
VERIFy sETTINGs/ sETUp COmplETE
In this step the GT displays the options you have selected in the previous steps. Once you have verified
the information to be complete simply press "Exit Main Menu" to complete the process.
To complete setup press Exit to Main Menu
52
sTEp 5
Next
to step 6
Communicating with Your Vehicle...
This may take a Moment
Exit
to main menu
®
sETUp COmplETE
Exit
to main menu
You have completed setup
for your v ehicle
You can run the setup wizard again
or adjust individual options
at any time from main menu .
®
sTEp 5
Next
to comm setup
The Following menu will setup
communication to your vehicle.
Exit
to main menu
®