Driving Coach Setup Wizard - Bully Dog GT Owner's Manual

driving COaCh setup wizard

For the driving coach to work properly it must be calibrated to the vehicle application in
use. Select the Driving Coach Setup from the main menu and then follow the on screen
instructions for guidance through the setup process. The Driving Coach Setup Wizard will
ensure that the results displayed on the driving coach screen are accurately calibrated to
the vehicle.
ATTENTION: The final step in the setup Wizard does require that the vehicle be driven up to 60 mph
to perform a drag calculation test. This test ensures that the Driving Coach feature is calibrated for
each particular application. This test should only be performed on a strait and flat road on a day when
wind speed is zero or near zero. be sure that the road used for calibration has a speed limit of at least
60 mph.
driving COaCh setup wizard:
To start the wizard select "Driving Coach setup," from the main menu and the press "Next," on the Wel-
come screen.
To continue to step 2 simply press the "Next," button.
Next
to step 1
Driving Coach Setup Wizard
The ne xt f ew steps will take you
through the initial setup .
Exit
to main menu
WElCOmE
Welcome to the
®
mAIN mENU
Go back
to General Disp
Gauge Setup
Driving Coach Setup
Set User Options
Vehicle Settings
®
Driving Coach Setup continues on the next page...
OperATION
49