Bully Dog GT Owner's Manual
  1. Manuals
  2. Brands
  3. Bully Dog Manuals
  4. Automobile Accessories
  5. GT
  6. Owner's manual

Bully Dog GT Owner's Manual

Gauge tuner
Hide thumbs Also See for GT:
Table of Contents

Advertisement

Quick Links

Owners Manual
Part 1:
Physical Installation
Part 2:
Operations and Downloading
Part 3:
Internet Updates
Appendix:
OEM pyrometers, pyrometer calibration, and other topics.
INSTALLATION
1

Advertisement

Table of Contents
loading

Related Manuals for Bully Dog GT

Summary of Contents for Bully Dog GT

  • Page 1 INSTALLATION Owners Manual Part 1: Physical Installation Part 2: Operations and Downloading Part 3: Internet Updates Appendix: OEM pyrometers, pyrometer calibration, and other topics.

  • Page 2: Updating

    INSTALLATION reMeMber tO update!!! Always update the GT before installing on a vehicle using the Update Agent internet update software. Visit www.bullydog.com to download the Update Agent and get in- stallation instructions for the Update Agent. The diagram below shows just how easy it is to update any of our electronic products.

  • Page 3: Introduction

    GT itself. This product is a relatively easy product to install, if installation assistance is required this prod- uct can be installed by any Bully Dog dealer and can also be installed using the assistance of our technical support team.

  • Page 4: Gt Diesel Applications

    INSTALLATION DIESEL applications 5.9l Cummins ‘03-’07 2500 5.9l Cummins ‘03-’07 3500 6.7l Cummins ‘07-’09 2500 6.7l Cummins ‘07-’09 3500 6.7l Cummins ‘07-’09 4500 6.7l Cummins ‘07-’09 5500...
  • Page 5 INSTALLATION 6.6l duramax ’06-’09 2500 ExpREss 6.6l duramax ’06-’09 3500 sAVANNAh 6.6l duramax ’06-’09 2500 6.6l duramax ’06-’09 3500 6.6l duramax ’01-’09 2500 sIlVERADO 6.6l duramax ’01-’09 3500 6.6l duramax ’01-’09 2500 sIERRA 6.6l duramax ’01-’09 3500 kODIAk 6.6l duramax ’06-’09 4500 6.6l duramax ’06-’09 5500 6.6l duramax ’06-’09 4500 TOpkICk...

  • Page 6: Gt Gas Applications

    INSTALLATION AVAlANChE 5.3l V8 ‘02-’09 6.0l V8 ‘07-’08 applications 8.1l V8 ‘02-’06 5.3l V8 ‘02-’05 EsCAlADE 6.0l V8 ‘02-’06 6.2l V8 ‘07-’09 5.3l V8 ‘03-’09 1500 ExpREss /sAVANNAh 6.0l V8 ‘03-’04 1500 4.8l V8 ‘03-’09 2500 5.3l V8 ‘03-’05 2500 6.0l V8 ‘03-’08 2500 4.8l V8 ‘04-’09 3500 6.0l V8 ‘03-’08 3500...
  • Page 7 INSTALLATION 5.7l V8 Hemi‘03-’08 1500 5.7l V8 Hemi‘03-’08 2500 5.7l V8 Hemi‘03-’08 3500 5.4l V8 ‘04-’05 ExCURsION 6.8l V10 ‘04-’05 ExpEDITION 4.6l V8 ‘04-’05 5.4l V8‘05-’07 4.6l V8 ‘07 ExplORER 5.4l V8‘05-’07 4.6l V8 ‘04-’08 F-150 / E-150 5.4l V8 ‘04-’08 F-250 / E-250 4.6l V8 ‘04-’05 5.4l V8 ‘04-’08...
  • Page 8 INSTALLATION PArt 1 Physical Installation These operating instructions are split into four sections: seCtiOn 1: Parts Included seCtiOn 2: Parts Description seCtiOn 3: Installation Overview seCtiOn 4: Installation seCtiOn 5: Mounting the GT using the Windshield mount...

  • Page 9: Table Of Contents

    ..................pgs. 15-20 Installation Overview ..................pg. 15 Installation ....................pg. 16 Step 1: Connecting the OBDII ................pg. 16 Step 2: Connecting the Power Wire ..............pg. 17 Step 3: Running GT Main Wire Harness ............pg. 19 mounting GT to Windshield mount ..............pg. 20...

  • Page 10: Bill Of Materials

    INSTALLATION seCtiOn 1: Parts Included The list below includes by name the major parts included in your GT package. The tools list indicates all of the tools necessary to complete the GT install. tOOls needed eXtra parts (optional) • Fuse Puller •...

  • Page 11: Parts Description

    ThE GAUGE TUNER: The main component is the GT Head Unit. The Head Unit is the interface through which all oper- ating functions take place including: Downloading, Monitoring, and the Driving Coach feature. gt front side: The GT has seven capacitive touch buttons.

  • Page 12: Obdii Adapter Plug

    4. power supply switch: use this switch to change power from running off of the Power Wire to OBD ll power as a power supply for the GT. 5. four pin usb: This port is used if a Bully Dog pyrometer kit is purchased for the GT. 6. five pin usb...

  • Page 13: Gt Main Wire Harness

    INSTALLATION GT mAIN WIRE hARNEss The main harness connects the GT to the OBD ll Adapter Plug and acts as the main line of com- munication for the GT. pOWER WIRE The Power wire connects the OBD ll Adaptor Plug to the vehicle fuse box to...

  • Page 14: Micro Sd Card

    GT at all times. UNIVERsAl WINDshIElD mOUNT This universal windshield mount is used to install the GT firmly onto the windshield, it is a suction cup mount that will work on any vehicle windshield. Check our web site for other mounting options, the GT is...

  • Page 15: Installation Overview

    The installation overview illustrates a properly installed GT. This overview is meant to help refer- ence the general location of installed parts and pieces of the GT. Note that some fuse boxes will be located inside the cab of the vehicle and will not require that the power wire go through the vehicle fire wall.

  • Page 16: Installation

    INSTALLATION seCtiOn 4: Installation These installation instructions are split into five Easy Steps. Follow the steps for the easi- est installation of this product. step 1: COnneCt the Obd ll adapter tO the vehiCle Obd ll pOrt This step involves locating the vehicle’ s OBD ll port and then simply plugging the OBD ll Adapter Plug into the OBD ll port.

  • Page 17: Step 2: Connecting The Power Wire

    INSTALLATION GT & Windshield Mount step 2: COnneCt the pOwer wire tO the vehiCle fuse bOX Step two involves locating the correct fuse within the vehicle fuse box, and connecting the power wire from the OBD ll Adaptor plug to the fuse in the fuse box.

  • Page 18: Clean Install Into Fuse Locations

    INSTALLATION FOR A ClEAN INsTAll INTO ThE FUsE lOCATIONs: There are multiple different fuse types in OEM vehicles. For a clean install, use a fuse tap and spade connector that will work with the specific fuse being used for this install. 1.

  • Page 19: Step 3: Running Gt Main Wire Harness

    In this section you will connect the GT Main Harness to the OBD ll Adaptor plug and then run the other end of the main harness up the side of the vehicle dash and connect it to the back of the GT.

  • Page 20: Mounting Gt To Windshield Mount

    INSTALLATION seCtiOn 5: Mounting the GT using the Windshield mount The final step to installation is mounting the GT to the windshield using the univer- sal windshield mount. 1. Locate the T-shaped mount socket on the back side of the GT.
  • Page 21 OperATION part 2 Operating Instructions These operating instructions are split into four sections: seCtiOn 1: Button Navigation seCtiOn 2: Set up Wizard for installing download seCtiOn 3: Exploring the General Display seCtiOn 4: The Driving Coach seCtiOn 5: Main Menu and Sub Menus...
  • Page 22 ........pgs. 28-44 seCtiOn 1: button Navigation ..........pg. 23 seCtiOn 2: GT setup Wizard for Installing Download ..pgs. 24-26 Step 1: The Setup Wizard .................. 24 Step 2: Vehicle Selection ................... 25 Step 3: The Download ..................34 seCtiOn 3: Exploring the menu system ......

  • Page 23: Button Navigation

    1: Button Navigation Capacitive Touch Buttons: The buttons used on the GT are Capacitive touch. Capaci- tive touch buttons only require a touch on the button area rather than a push like regular buttons require. It is not necessary to apply any significant force to the but- ton while navigating through product screens.

  • Page 24: Gt Setup Wizard For Installing Download

    The Setup Wizard appears on the screen automatically and will only appear the very first time the GT is installed. Opting out of the Setup Wizard is OK, the vehicle selection process and download process can also be performed through the main menu.

  • Page 25: Step 2: Vehicle Selection

    2: vehiCle seleCtiOn Select the option from the vehicle selection screen that most matches the vehicle in use; the GT will not be able to perform a download or monitor correctly if the correct vehicle type is not specified.

  • Page 26: Step 3 The Download

    Do you want to download? You can either install a download MORE now or install later from the main menu. Your GT will only be able to run monitoring features until the download is completed. Press MORE to continue to the next screen) ®...

  • Page 27: Exploring The Menu System

    OperATION seCtiOn 3: Exploring the main screen The Main Screen is the screen that displays vehicle activity, it is also the screen from which the main menu is accessed. The main screen has a multitude of different functions; the diagrams in this section fully explain each function accessed from the main menu.

  • Page 28: Operating Instructions

    2: Press any of the four buttons on FUNCTION FUNCTION Power Level Up the left side of the GT adjacent to one of the Power Level Down vehicle parameters on the screen will display Use the power level buttons to control power that parameter in the large gauge area.

  • Page 29: Large Gauge Styles/The Driving Coach

    OperATION lARGE GAUGE sTylEs/ ThE DRIVING COACh The large gauge can display in three different gauge styles plus the Driving Coach. Hold the button down next to the vehicle parameter currently displayed in the large gauge area to switch between the different large gauge display types. 1.

  • Page 30: The Driving Coach

    Continuously hold any of the four buttons, adjacent to the vehicle parameters displayed on the screen, on the left side of the GT. As any of the four buttons are continuously held the Large Gauge area will rotate through four different gauge styles and the Driving Coach. Simply re- lease the button when the Driving Coach appears in the Large Gauge area.

  • Page 31: Driving Coach Display

    OperATION the driving COaCh display diagraM The large gauge area is where the Driving Coach information is displayed. The diagram below illustrates the information that is collected and displayed by the Driving Coach. Real Time Fuel Economy: The first bar graph dis- play fuel economy in gallons per hour or liters per 100 kilometers in real time.

  • Page 32: Main Menu & Sub-Menus

    OperATION seCtiOn 5: Exploring the Main Menu and submenu systems The diagram below shows all of the Main Menu items, some menu items are vehicle specific as noted adjacent to those menu items. Section 5 includes comprehensive information on each main menu item and all sub menus. mAIN mENU Go back Change Vehicle...

  • Page 33: Change Vehicle

    ChANGE VEhIClE: The Change Vehicles Menu is only used for two reasons: 1. The GT is being transferred to a new vehicle. Note the GT Installed Download feature must be returned to stock before it is transferred another vehicle. 2. If the wrong vehicle is selected the correct vehicle can be selected in the Change Vehicle menu.

  • Page 34: Install Download

    3. Return a vehicle to stock: To completely return a vehicle to its factory stock conditions. ThE sD CARD mUsT bE INsERTED IN ThE sIDE OF ThE GT TO DOWNlOAD TO A VEhIClE. Diesel Tuning: The diesel tuning is the only tuning available that is adjustable on the fly, this means that the level of added horsepower can be adjusted from the Main Screen once a download has been completed on the vehicle..
  • Page 35 4. Allow up to one hour for installation. The GT easily installs in under 30 minutes. However, allocate at least an hour for installation in case any problems are encountered during installation.
  • Page 36 OperATION reMOving fuses fOr ’01-’02 gM duraMaX vehiCles IMPORTANT: Skip the steps on this page if your vehicle is not an ’01-’02 GM 6.6L Duramax . WARNING: Failure to remove the fuses while downloading the programs into the computer may result in computer hardware failure.
  • Page 37 OperATION reMOving fuses fOr ’03-’05 gM duraMaX vehiCles IMPORTANT: Skip the steps on this page if your vehicle is not an ’03-’05 GM 6.6L Duramax . WARNING: Failure to remove the fuses while downloading the programs into the computer may result in computer hardware failure.
  • Page 38 OperATION FUsE INFORmATION Gm ‘99-’06 ONly Before installing a download into the vehicle always pull the fuses mentioned below for the GM applications mentioned below. Be sure to replace all of the fuses back into the vehicle fuse box once a download has been completed. ‘99-’02 gM C/K w/4.8/5.3/6.0/8.1l engines Remove these Fuses from the Fuse Box Located Inside the Vehicle (located near the driver’...
  • Page 39 Performing a download is a very simple operation, simply follow the instructions dis- played on the GT screen. Before downloading to a vehicle be sure to read all download installation precautions and remove all fuses on GM brand vehicles. Note fuses must be replaced after a download is complete.
  • Page 40 OperATION Engine Tuning: During the download the GT will prompt all gasoline users to select the desired engine tune. At this point simply specify the engine tune; the table below illustrates the three settings available: Premium, Regular, and Stock. Diesel users do not have to select an engine tune, the diesel GT automatically loads the tuning information into the vehicle.
  • Page 41 OEM speed limiter. The tables below display the range of adjustability for gasoline and diesel vehicles. Before adjusting the OEM speedometer the GT will require an opt in; by s electing “yes,” to opt in the user agrees that the vehicle has tires, suspension, and any other necessary modifications rated for speeds in accordance with the adjustment made.
  • Page 42 3. FORD AND lINCOlN GAsOlINE VEhIClE spECIFIC DOWNlOAD FEATUREs TRANsmIssION TUNING (AUTOmATIC TRANsmIssIONs ONly): Two different options exist for transmission tuning, choose to accept a bully Dog Custom transmission tune or to leave transmission tuning stock. firm tune - This tune will affect shift firmness and shift points. It is an optimized tune designed for performance.
  • Page 43 OperATION 4. Gm GAsOlINE VEhIClE spECIFIC DOWNlOAD FEATUREs TRANsmIssION FIRmNEss* (AUTOmATIC TRANsmIssIONs ONly): This feature will turn up the pressure in the transmission so that shifts feel solid. It also helps reduce transmission slippage under heavy stress. performance: Pressure is greater than tow and stock. This setting is recommended to be used in combi- nation with, but is certainly not limited to the High Performance Horsepower program.
  • Page 44 OperATION Gm GAsOlINE VEhIClE spECIFIC DOWNlOAD FEATUREs (CONTINUED) CAlIbRATE OEm spEEDOmETER FOR GEAR RATIO (AUTOmATIC TRANsmIssIONs ONly): If no gear ratio modifications have been made to the vehicle then choose the stock setting when the tuner prompt appears to choose a gear ratio. This will ensure that no modifications are made to the stock program.
  • Page 45 Wide open throttle refers to a throttle position governor placed on stock Nissan vehicles. It limits the driver from using 100% of the vehicle throttle from 0-40 mph. bully Dog’ s Wide Open Throttle feature will remove this governor from the vehicle.
  • Page 46 Transferring to a new vehicle: The GT is transferable to a new vehicle, but only after the original vehicle has been returned to stock and the product is fully uninstalled.

  • Page 47: Gauge Setup

    So to select gauge location 1, press the locations. second button down on the left hand side of the GT. To select the 4th gauge location press the bottom button or the 5th button down on the left side.
  • Page 48 For all other vehicle applications pyrom- eters can be installed, a bully Dog pyrometer is required for use with the GT and is the only pyro that will work with the GT.

  • Page 49: Driving Coach Setup Wizard

    OperATION driving COaCh setup wizard For the driving coach to work properly it must be calibrated to the vehicle application in use. Select the Driving Coach Setup from the main menu and then follow the on screen instructions for guidance through the setup process. The Driving Coach Setup Wizard will ensure that the results displayed on the driving coach screen are accurately calibrated to the vehicle.
  • Page 50 OperATION step 1: ENGINE DIsplACEmENT: Choose Engine Displacement in liters, refer to vehicle owners manual. To continue to step 2 simply press the “Next,” button. Next ENGINE sIZE to step 2 The selected Value for Engine sizes Engine Size is displayed in the box below: Engine sizes 1.3L...
  • Page 51 To select the correct curb weight scroll to the correct value listed using the buttons on the right side of the GT then press the “Next,” but- ton to proceed to step 4. step 4:...
  • Page 52 6: VERIFy sETTINGs/ sETUp COmplETE In this step the GT displays the options you have selected in the previous steps. Once you have verified the information to be complete simply press “Exit Main Menu” to complete the process. To complete setup press Exit to Main Menu...

  • Page 53: User Options

    OperATION user OptiOns In this sub menu you get to personalize your GT. The descriptions for all the user op- tions are below. A more detailed description of each is on the following pages. adjust baCKlight: Change screen backlighting for day and night driving.
  • Page 54 OperATION baCKlighting adjustMent: The backlighting for the GT can be set for both a Day and Night mode. The GT switches be- tween day and night modes based on whether the vehicle head lights are turned on or off. If the vehicle headlights are turned off the GT backlighting will switch to day mode settings, if the lights are on the backlighting will switch to night mode settings.
  • Page 55 OperATION audiO feedbaCK On/Off The audio on the GT is either on or off, highlight the button adjacent to the on or off area on the screen to turn audio on and off. Exit the menu and the selection will automatically take effect.
  • Page 56 OperATION english/ MetriC units The GT contains the ability to display vehicle parameters and fuel economy in either Metric units or English standard units. simply exit the menu and the selection will auto- matically take effect. Use the buttons adjacent...

  • Page 57: Vehicle Options

    OperATION vehiCle OptiOns: In this sub menu you get to manually setup the parameters that the Driving Coach uses to calculate fuel economy and wasted energy. These parameters can also be setup in the Driving Coach Setup Wizard. The descriptions for all the vehicle options are listed below.
  • Page 58 Engine sizes buttons on the to continue. 4.2L * Units are in Liters. right side of the GT to scroll up and down. Highlight ® the correct displacement. vehiCle weight Choose the correct vehicle weight to help calibrate the driving coach to work correct with the vehicle application.
  • Page 59 Gasoline Use the buttons adjacent to GASOILINE the preferred fuel type. DIESEL ® COMMuniCatiOn prOtOCOl The GT will automatically establish sTEp 5 Next communications with the vehicle. to comm setup The Following menu will setup communication to your vehicle. Exit to main menu ®...

  • Page 60: Defueling Parameters

    Current setting are displayed in Defuel Menu Below is a list of all of the defueling capabilities for the GT. All defueling options can be activated at the same time, all can be turned off, or a mix of on and off. Each defueling option is adjusted individu- ally to be on or off and set to a particular defueling temperature.
  • Page 61 OperATION set defuel levels: When entering a setup menu for any of the defuel options the menu will have a list of defuel levels to select from based on that specific defuel parameter. The selected value is displayed on the left, to select a defuel level highlight the amount and then exit the setup menu.
  • Page 62 This feature should only be used if the diesel particulate filter gets clogged and will not go into mobile Desoot mode. Follow the on screen in- struction provided by the GT. Notice: mobile Desoot function should only be used if absolutely necessary.
  • Page 63 OperATION spECIAl FUNCTIONs (DODGE GAs AND DIEsEl VEhIClEs ONly) The special functions are available for use only on the Dodge vehicles These functions can be performed at any time. The descriptions below tell what each function does to the vehicle. Go back OpTIONs mENU Idle Up “Auto Only”...
  • Page 64 OperATION spECIAl FUNCTIONs (CONTINUED) fOg laMp Enabling this feature will allow the fog lights and high beams to operate at the same time. This feature is for Off-road use only. hOrn Chirp On lOCK Enabling this feature will sound a horn chirp each time the doors are locked when using a remote door lock system.
  • Page 65 OperATION TRANsmIssION TUNE: FORD 6.0l pOWER sTROkE ‘03-’07 ONly This allows you to set a specific transmission tune style for each on-the-fly power set- ting. There are three transmission tune styles available: stock, smooth, and aggres- sive. Not all of the tunes are available for every power setting. Notice that upon entering the transmission tune menu that, Extreme, is highlighted in black.
  • Page 66 The tire size function allows you to adjust the speed that the GT will display in one of the gauge locations to account for larger or smaller than stock tire sizes. The range of tire sizes that the GT will adjust for starts at 28” and goes up to 39” and it adjusts in incre- ments of .25”.
  • Page 67 Codes (DTCS). Upon entering this menu, the GT will auto- matically begin to check the vehicle for DTCs and it will then display those DTCs on the GT screen. Once it displays the DTCs value and description on the screen it will allow you to erase the DTCs from the vehicle.
  • Page 68 OperATION shOW sETTINGs: The Show Settings Menu will allow you to see vehicle information and also defuel set- tings. See the diagram below to see everything that is listed in this menu. Go back settings ®...
  • Page 69 (Press Y to complete update) ® The GT will take a minute to update the software, please wait patiently while the ap- plications loads into memory. If there are new features available look on our web site for a description of those features.
  • Page 70 GT contains the same information, and no new information was added. If this happens check the version information of the current software loaded on the GT, in the show settings menu, and compare that to what is available online.
  • Page 71 Based on the change in version numbers between the current version on the GT and the version that is available on the Bully Dog web site the GT may have to be returned to stock. SEE section 1 for details.
  • Page 72 The change in the version number for any new update issued on the Update Agent can be viewed on the Bully Dog web site and compared to the version on the GT. This is how to determine if a download to stock is necessary.
  • Page 73 1. To download the Update Agent through our web site visit: www.bullydog.com/download_center. . This address will take you to the Bully Dog download center where a free copy of the Update Agent can be downloaded. 2. A free copy of the Update agent can also obtained by requesting an Update Agent CD.
  • Page 74 3. From this screen there is only one simple thing to do; press the update button on the right hand side of the screen and the Update Agent will automatically update the GT software. 4. When the Update Agent finishes updating the GT software the GT can be remove from the PC and the USB cable.

  • Page 75: Pgs

    AppeNDIX part 4 Appendix The appendix contains important information for the GT and is split into four sections. seCtiOn 1: Pyrometer calibration procedure seCtiOn 2: Transmission relearn procedures: Ford & GM seCtiOn 3: OEM pyrometer locations seCtiOn 4: Troubleshooting/error codes...

  • Page 76: Pyrometer Calibration

    AppeNDIX seCtiOn 1: Pyrometer calibration procedure BEFORE THIS STEP CAN BE COMPLETED, COMPLETELY INSTALL THE GT AND ALL OF ITS COMPONENTS. 1. Vehicle must be set to Stock HP/TQ levels-meaning no HP/TQ modifications of any kind (tuner or plug- in modules).

  • Page 77: Transmission Relearn

    Relearning the transmission can help the transmission adjust to the higher levels of power offered by the GT resulting in a better shifting transmission. Follow the vehicle specific procedures below to relearn the follow- ing transmissions.

  • Page 78: Oem Pyrometer Locations

    The diagrams below shows where Pyro 1 and Pyro 2 are installed on the 2007.5 and newer light duty diesel trucks. There is no installation required for these pyrometers; each pyrometer is OEM. The temperatures at each location are displayed on the GT as a vehicle parameter under the gauge setup menu.
  • Page 79 AppeNDIX Diesel Particulate Filter (DPF) Catalytic Converter DODGE CUMMINS Diesel Particulate Filter (DPF) Catalytic Converter GM DURAMAX...
  • Page 80 Loose Connections functioning normal. For more information on up-to-date troubleshooting guide for the GT, go to www.bullydog.com/Product_Updates.php GT ERROR CODEs: For error code information regarding any error codes that appear while operating the GT visit the web address below: www.bullydog.com/GT_Tech.php...

  • Page 81: Troubleshooting/Error Codes

    AppeNDIX NOTEs: _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________ _____________________________________________________________...

  • Page 82: Formatting Sd Card

    5: Formatting SD card The SD card should only be taken out of the GT to perform internet upgrades. It is the primary means of performing internet upgrades for the GT. In case an SD Card is lost or broken, a new SD Card can be purchased and used to update the GT.
  • Page 83 SD card. This file allows the Update Agent to identify the SD card as a GT SD card. 8. Now unplug the card reader and plug it back into the PC and the Update Agent should recognize this SD Card.
  • Page 84 UpDATeS DrIVING COACH ™ featuring technology The Driving Coach Software gathers information from the sensors that each vehicle is equipped with from the factory. The software then processes the information and uses that information to serve as the Driving Coach. It then instructs the driver to use the most economical driving techniques in order to maximize fuel economy.

This manual is also suitable for:

Gauge gt

Table of Contents