Table of Contents
Advertisement
Operational Problem
Copy is made in monochrome black even
though the original is color.
Coloring setting does not work properly.
Copies cannot be made with Image
Combination or Frame Erase as desired.
References
5-4
Through the ACS function, this copier is automati-
cally set to the full color mode if part of the original
is in color. However, if the colored section is small
or the color is faint and close to black, then the
black mode may be automatically set. In order to
make certain that copies of this sort of original are
made in the full color mode, cancel the ACS
function and make the copies in the full color
mode.
If the Coloring Setting target perimeter line is thin,
the Coloring Setting may not come out as desired.
Make the width of the target perimeter line at least
0" (1mm).
Coloring target
In the Image Combination mode or Original Frame
Erase/Book Frame Erase mode, the size of the
original is specified. But if the size specified is
different from the actual size, copies cannot be
made as desired. Confirm the original size speci-
fied.
At least 0"
1mm
Advertisement
Table of Contents
