Table of Contents
Advertisement
2
TANDBERG MediaP
Videoconferencing System
CONFIGURATION
The codec, projector, and electronic whiteboard must be calibrated in
order to properly utilize the MediaP
module enables an electronic interactive whiteboard to become an
integral part of the video presentation enabling greater learner
participation in the classroom and allowing participants to interact with
dynamic content.
DVI OUT
HDMI 1 for C20 ONLY
DATA 1
DVI/PC
C20 will require the
CAMERA CONTROL /
SERIAL COM Y‐CABLE.
One end to for data
and other end for
camera control.
POWER
OUTLET
NOTE:
Configure your MXP CODEC such that DATA 1 is set to 9600, N, 8, 1 in Control mode.
If using an MXP CODEC, set your local computer resolution to 1024x768 @ 60Hz and have the VGA output clone/mirror the laptop display.
Do not use the extended desktop feature.
Configure the C-Series CODEC such that COM is set to 38400, N, 8, 1 in Control mode. Set Login to OFF.
D505068.02
. The integrated TANDBERG Synch
2
VGA/DVI
CODEC
Currently supported electronic whiteboards:
• Promethean ActivBoard 100
• Promethean ActivBoard 300
• Promethean ActivBoard 300 Pro
• Promethean ActivBoard AC2
• SMART DViT PX300 Series
• SMART DViT PX400 Series
• SMART 600 Series*
• SMART 500 Series
USB-A
USB-B
SOFTWARE v3.0
* dual touch not supported
USB TYPE B
USB TYPE A
SERIAL or USB-B
USB-A
VGA/DVI
adapter may
be required
14
Advertisement
Table of Contents
