Table of Contents
Advertisement
2
TANDBERG MediaP
Videoconferencing System
Installing Projector
The projector must be mounted to the adjustable projector shelf on the mobile cart.
Refer the following illustration as an example* for mounting the projector.
* NOTE: Your projector and mounting holes may appear differently from the example shown below.
1. Align the three mounting holes on the bottom of the projector to the corresponding holes on the projector shelf.
Secure the projector to the shelf using three thumbscrews*.
2.
* NOTE: The thumbscrews will not tighten completely. This is done to allow you to adjust the feet on the projector to maximize the viewing angle for
your particular environment.
3. Once the projector is securely mounted, match the labeled connection cables to the projector:
a. Projector VGA IN
b. Power
D505068.02
10
Advertisement
Table of Contents
