DFI NF4 SLI INFINITY User Manual page 89

PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
The settings on the screen are for reference only. Your version may not be identical
to this one.
Init Display First
This field is used to select whether to initialize the onboard VGA/
AGP or PCI first when the system boots.
Onboard/AGP When the system boots, it will first initialize the
PCI Slot
Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically
configure all of the boot and Plug and Play compatible devices.
Auto(ESCD) The system will automatically detect the settings for
Manual
onboard VGA or AGP.
When the system boots, it will first initialize PCI.
you.
Choose the specific IRQ in the "IRQ Resources"
field.
3
BIOS Setup
89