DFI NF4 SLI INFINITY User Manual page 87

Soft-Off by PBTN
This field allows you to select the method of powering off your
system.
Delay 4 Sec. Regardless of whether the Power Management func-
Instant-Off
WOL (PME#) From Soft-Off
Set this field to Enabled to wake up the system via the onboard
LAN or via a LAN card that uses the PCI PME (Power
Management Event) signal to remotely wake up the system. Access
to the LAN card will cause the system to wake up. Refer to the
card's documentation for more information.
WOR (RI#) From Soft-Off
Set this field to Enabled to wake up the system via an external
modem or via a modem card that uses the PCI PME (Power
Management Event) signal to remotely wake up the system. Access
to the modem card will cause the system to wake up. Refer to the
card's documentation for more information.
tion is enabled or disabled, if the power button is
pushed and released in less than 4 sec, the system
enters the Suspend mode. The purpose of this
function is to prevent the system from powering off
in case you accidentally "hit" or pushed the power
button. Push and release again in less than 4 sec to
restore. Pushing the power button for more than 4
seconds will power off the system.
Pressing and then releasing the power button at
once will immediately power off your system.
3
BIOS Setup
87