Table of Contents
Advertisement
Installation of the printer driver (Macintosh)
Specifying the TCP/IP setting for the computer
1
On the "Apple" menu, select "System Preferences".
2
Click the "Network" icon.
3
From "Show", select "Built-in Ethernet".
–
Set an IP address and a subnet mask, if necessary.
–
In OS 10.5, clicking [Advanced] also allows you to set an IP address from the [TCP/IP] tab.
4
Click [Apply].
5
Click the close button provided at the upper left of the window.
–
When the "This service has unsaved changes." message appears, click the [Apply].
Adding a printer
1
On the "Apple" menu, select "System Preferences".
2
Select [Print & Fax].
3
Click [+] provided at the lower left of the screen.
4
Click the [IP (Printer)] tab to set [Protocol] in [Internet Printing Protocol-IPP].
5
Enter the IP address of the output device in [Address].
6
Enter the "ipp" in the [Queue].
7
In OS 10.5, after selecting [Select a driver to use] in [Print using] provided in the lower section of the
screen, select [GENERIC 95BW-1 PS(P)] from the list and then click [Add].
–
In OS 10.4, select "GENERIC" in "Print Using", select the desired model from the list of models, and
then click the [Add].
–
In OS 10.5, entering [GENERIC] in the text box for search allows you to find a driver with ease.
8
When [Installable Options] is displayed, select an option that has been equipped to the copier and then
click [Continue].
–
An option can also be set in the same manner as with [Options and Supplies] - [Driver] tabs in OS
10.5 ([Printer Setup] - [Installable Options] in OS 10.4), by selecting a relevant printer name in the
[Print & Fax] window.
9
The setting is completed when being registered with [Print & Fax].
VarioLink 9522 (Version 2)
4
4-7
Advertisement
Table of Contents
Troubleshooting
