Oce VarioLink 9522 User Manual page 172

8
Fold
Various ways of the folding can be setup.
Item
The [Fold] cannot be set in the following cases:
- When any item other than [Off] is selected for the [Staple], [Punch], only [Z-fold] can be selected.
- When any item other than [Off] is selected for the [Front Cover], [Back Cover], [PI Front Cover] and [PI
Back Cover].
The setting of [Fold] is available when the following unit is installed.
Item
Z-Fold
Multi-Letter Fold (In/Out)
Multi-Half Fold
Image Shift
Adjusts the details of the printing position to the output paper.
Example: When the settings are shifted to the right by 100 and down by 300. (Unit: 0,1 mm)
8-24
Description
Z-Fold
Center Staple and Fold
Multi-Letter Fold In
Multi-Letter Fold Out
Multi-Half Fold
Punch Z-Fold Unit
o
Shifted to the right
by 10 mm
PostScript PPD printer driver setting (Windows)
Finisher (FS-611)
o
o
Shifted down
by 30 mm
VarioLink 9522 (Version 2)