Table of Contents
Advertisement
8
PI Front Cover Tray
Sets a front cover for which the paper is from the [PI Tray 1] or [PI Tray 2].
The [PI Front Cover] cannot be set in the following cases:
-
When the [Cover Sheet Feeder] is not selected in the [Device Settings] tab - [Installable Options]
-
When any item other than [Off] is selected for the [Fold].
PI Back Cover Tray
Sets a back cover for which the paper is from the [PI Tray 1] or [PI Tray 2].
The [PI Back Cover] cannot be set in the following cases:
-
When the [Cover Sheet Feeder] is not selected in the [Device Settings] tab - [Installable Options]
-
When any item other than [Off] is selected for the [Fold].
Transparency Interleave
Set this item when using the transparency interleave as the paper.
Select either [Print] or [Blank].
Item
Print
Blank
The [Transparency Interleave] cannot be set in the following cases:
-
When the [Fine] is not selected in the [Paper/Quality] tab - [Media]
-
When the [92-105g/m
Interleave Tray
Uses to select the paper tray for Transparency Interleave.
Paper Tray (Transparency Interleave) cannot be set in the following cases:
-
When the [Paper Sources] is not selected in the [Device Settings] tab - [Installable Options]
Wait Mode
Outputs the test print and checks the current setting from the control panel of copier. Use this when printing
a large volume document, such as multiple sets of pages.
1
Open the file to be printed and select [File] - [Print] of application.
2
Click [Preferences] to open the [Printing Preferences] window and then click [Advanced].
3
Click [t] besides the [Wait Mode] to display the list. Then select [Wait Mode] or [Proof and Print] and
click [OK] to close the [Advanced Options] window.
–
Select [Wait Mode] to wait before printing the document to check the current setting from the
control panel of copier.
–
Select [Proof and Print] to print the one copy as a test to check the output and the current setting
from the control panel of copier.
8-26
Function
This is set when inserting the printed interleaf for the transparent sheet.
This is set when inserting the blank interleaf for the transparent sheet.
2
] is not selected in the [Advanced Options] - [Paper Weight]
PostScript PPD printer driver setting (Windows)
VarioLink 9522 (Version 2)
Advertisement
Table of Contents
Troubleshooting
