LOADING PAPER
■ Loading transparency film
Be sure to load the transparency film with the white label side up. Make sure no image will be printed on the label.
Printing on the label may cause smudges on prints. Transparency film must be set in the portrait orientation.
Specifications (multi purpose drawer (the upper tray of the
stand/3 x 500 sheet paper drawer or stand/MPD & 2000 sheet
paper drawer))
Name
Paper size/weight
Paper capacity
Loading paper in the stand/3 x 500 sheet paper drawer
Upper paper tray:
The upper tray is the same as the multi-purpose drawer. Use the upper tray according to the instructions for the
multi-purpose drawer on page 2-8.
Middle and lower paper trays:
Up to 500 sheets of Océ recommended plain paper can be loaded in these trays. The method of loading paper is the
same as for paper tray 1 in the main unit. See the description (page 2-2).
NOTE
If the paper size or paper type is changed in either paper tray, the tray settings must be changed in system settings.
Refer to "
Setting the paper type and paper size
Specifications (stand/3 x 500 sheet paper drawer)
Name
Paper size/weight
Paper capacity
(ordinary paper)
Dimensions
Weight
2-10
Multi purpose drawer (the upper tray of the stand/3 x 500 sheet paper drawer or
stand/MPD & 2000 sheet paper drawer)
See specifications of paper trays on page 2-3.
500 sheets (20 lbs. (80
m
g/
of transparency film
" on page
.
2-5
Stand/3 x 500 sheet paper drawer
See specifications of paper trays on page 2-3.
500 sheets (20 lbs. (80
m
g/
23-3/16" (W) x 24-51/64" (D) x 15-29/32" (H)
(589 mm (W) x 630 mm (D) x 404 mm (H))
Approximately 70.6 lbs. or 32.9 kg
)) of paper, 40 envelopes, 40 postcards, 40 sheets
2
)) each
2