FINISHER
Misfeed in the finisher
When a misfeed occurs in the finisher, remove the misfed paper following the procedure below.
1
Remove the misfed paper from the output
area.
2
Open the finisher top cover.
Top cover
Remove the misfed paper.
3
Open the finisher compiler.
4
3-12
Be careful not to tear the
misfed
paper
during
removal.
Move the tab in the
direction of the arrow as
shown in the illustration
to open the top cover.
Be careful not to tear the
misfed
paper
during
removal.
After
removing
the
paper, press down on
the top cover to close it.
Release the latch to
open
the
finisher
compiler.
5
Raise the paper guide and remove the
misfed paper.
Paper
guide
6
Close the finisher compiler.
Be careful not to tear the
misfed
paper
during
removal.