Initial Connection; Connecting To The Phone For The First Time - DOPOD C500 User Manual

Windows mobile smart phone
Table of Contents

Advertisement

9.4 Initial Connection

When you connect the phone to a computer with a USB cable, the Windows
Mobile Device Center will automatically run the Synchronization Setup Wizard
to guide you through the installation.
Before establishing a connection, you must make sure the phone power is on
and connected to the computer by the transfer cable. To obtain connection
through Bluetooth, please refer to section 9.7.
9
If your computer is already installed with Office OneNote 2007, you can use
the OneNote Mobile software installed in the phone to synchronize the
OneNote notes in your computer to the mobile phone.
You can create Partnership relationships with at most two computers,
however the e-mail can be synchronized with only one computer.
Action:
Select
1
After the mobile phone is connected to the
computer, select the "Configure the Device
to synchronize or select "connect without
248
configuring the device".
Vox_CH09.indd 248

Connecting to the phone for the first time

Configure the Device
Check mark
<data type>
2
Then select
Next
Select the data type you wish to sync. For
example, Contacts, Calendar, E-mails, etc.
2007/4/9
02:51:29

Advertisement

Table of Contents
loading

Table of Contents