First Connection; Connect To The Phone For The First Time - DOPOD D810 User Manual

6.4 First Connection

Action:
1
Once connected, ActiveSync will au-
tomatically run the sync wizard. Press
Cancel if sync is not required.
CH06.indd 123
When you use the phone and computer to connect via USB cable, Infra-
red or Bluetooth for the first time, the ActiveSync® application program
on the personal computer will automatically detect if your device is al-
ready connected to the computer. It will then execute the sync configura-
tion wizard to create the ActiveSync connection between the phone and
computer. Before establishing the connection, you must make sure the
phone is powered on and connected to the computer with the transfer
cable.To obtain connection through Bluetooth, please refer to section 6.7.
If your phone contains past items that have not been synced with the
computer, ActiveSync® will ask if you wish to combine or replace the
device or data on the computer.If you wish to keep the sync information
on the phone, please select
computer". Selecting
will overwrite the original sync information on the phone.
Firewall will cause incorrect operation of ActiveSync and result in con-
nectionfail.Please use one of the following method to resolve the prob-
lem:
* Consult 6.13 disabling "Enable advanced network functionality
* Refer to your firewall provider for ActiveSync connection settings.

Connect to the Phone for the First Time

Then select Next
"combine items on device with items on
"replace items on device with items on computer"
Check
2
Select the data type you wish to sync.
For example: contacts, calendar,
e-mail types, etc
<Data type>
6 6
123
2006/11/3 上午 11:53: