Using Wi-Fi Connection - DOPOD P100 User Manual

5.2 Using Wi-Fi Connection

To run Wireless LAN on your device, you need access to broadband
Internet, and the necessary access point or router that emits WLAN
signals. If you do not have access to broadband Internet, consult your
ISP before you try to run this utility. However, the availability and range
of your device's WLAN signal depends on the number, infrastructure,
and other objects through which the signal passes.
Check for a Wireless LAN signal
Before you start a Wi-Fi connection, verify that your device has access
to a Wireless LAN channel signal. You can check the current wireless
connection status from the following two screens of your device.
• Today screen. If your device detects a WLAN network
connection, the WLAN connection icon appears at the top of the
Today screen and a "W" icon appears at the bottom-right corner
of the screen.
• WLAN Power Status screen. The current connection status and
power save mode for your Wireless connection.
Note WLAN (Wi-Fi) is the default wireless channel setting for your device.
To connect to a Wi-Fi network
1. Tap
2. Tap the fi rst button to turn on Wi-Fi connection.
The WLAN icon
that Wi-Fi connection is active now.
to open Comm Manager.
is then displayed on Today screen to indicate
Getting Connected
|
57