Initial Connection; Connecting To The Phone For The First Time - DOPOD S300 User Manual

9. 4 Initial Connection

When you use the phone and computer to connect via USB cable,
Bluetooth, or IR for the first time, the ActiveSync® application program on
the personal computer will automatically detect if your device is already
connected to the computer. It will then execute the sync configuration
wizard to create the ActiveSync® connection between the phone and
computer. Before establishing the connection, you must make sure the
phone has been turned on and connected with the computer through the
9
transfer cable. To obtain connection through Bluetooth, please refer to
section 9. 7.
Action:
Select
1
After phone is connected with the
computer, ActiveSync will automatically run
the sync wizard. If synchronization is not
required, please press Cancel.
266
ch09.indd 266
Connecting with the phone for the first time
Next Check-mark Data type
2
Select the data type you wish to sync. For
example, contacts, calendar, e-mail types,
etc.
2006/5/16 03:26:31