Select A Fluid Nozzle And Air Cap - Graco 244581 Instructions-Parts List Manual

Installation
Select a Fluid Nozzle and Air
Cap
WARNING
Pressurized Equipment Hazard
To reduce the risk of an injury, follow the
Pressure Relief Procedure on page 20
before removing or installing a fluid nozzle
and/or air cap.
The gun is supplied with Part No. 197266 Nozzle and
24A276 Air Cap. If you require a different size, refer to
Table 1 and Table 2 , and instruction manual 309419, or
consult with your Graco distributor. See Air Cap/Nozzle
Replacement on page 42.
A wide pattern kit (P/N 24A431) is included with the gun
and if installed, will provide fan air for wider spray pat-
terns. (If pattern becomes split, use the fan air valve to
reduce the amount of fan air.)
16
Table 1: Fluid Nozzles
Size,
Part No.
mm (in.)
197263 0.75 (.030)
197264 1.0 (.042)
197265 1.2 (.047)
Table 2: Air Caps
Pattern Shape
Part No. and Length in.
(mm)
Round end;
24A438
15-17 (381-432)
Round end;
24A279
14-16 (356-406)
Tapered end;
24A376*
17-19 (432-483)
Tapered end;
24A274
12-14 (305-356)
Round end;
24A439
11-13 (279-330)
* Also available in the following colors:
24A276 - blue
24A277 - red
24A278 - green
Size,
Part No.
mm (in.)
197266 1.5 (.055)
197267 1.8 (.070)
197268 2.0 (.080)
Recommended Fluids and
Production Rates
Light to medium viscosity.
Up to 15 oz/min (450
cc/min)
Medium to high viscosity
and high solids.
Up to 15 oz/min (450
cc/min)
Light to medium viscosity.
Up to 15 oz/min (450
cc/min)
Light to medium viscosity.
Up to 15 oz/min (450
cc/min)
Medium to high viscosity
and high solids.
Up to 15 oz/min (450
cc/min)
For use with 2.0 mm nozzle.
309293K