Select A Fluid Nozzle And Air Cap - Graco OR PRO TI1681A Instructions-Parts List Manual

Installation
Select a Fluid Nozzle and Air
Cap
WARNING
Pressurized Equipment Hazard
To reduce the risk of an injury, follow the
Pressure Relief Procedure on page 20
before removing or installing a fluid nozzle
and/or air cap.
The gun is supplied with Part No. 197266 Nozzle and
197477 Air Cap. If you require a different size, refer to
Table 1 and Table 2 , and instruction manual 309419, or
consult with your Graco distributor. See Air Cap/Nozzle
Replacement on page 42.
16
Table 1: Fluid Nozzles
Size,
Part No.
mm (in.)
197263 0.75 (.030)
197264 1.0 (.042)
197265 1.2 (.047)
Table 2: Air Caps
Pattern Shape
Part No. and Length
in. (mm)
Round end;
197477
15-17 (381-432)
Round end;
197478
15-17 (381-432)
Tapered end;
197479
13-15 (330-381)
Round end;
197480
16-18 (406-457)
Tapered end;
197481
17-19 (432-483)
Size,
Part No.
mm (in.)
197266 1.5 (.055)
197267 1.8 (.070)
197268 2.0 (.080)
Recommended Fluids and
Production Rates
Light to medium viscosity.
Medium to high production.
Light to medium viscosity.
Low to medium production.
Light to medium viscosity.
Medium to high production.
Medium to high viscosity
and high solids.
Low to medium production.
Medium to high viscosity
and high solids.
Medium to high production.
For use with 2.0 mm nozzle.
309293J