Select A Spray Tip; Install The Spray Tip - Graco 244592 Instructions-Parts List Manual

Select a Spray Tip

The fluid output and pattern width depend on the size of
the spray tip, the fluid viscosity, and the fluid pressure.
Use the Spray Tip Selection Chart, page 51, as a
guide for selecting the appropriate spray tip for your
application.

Install the Spray Tip

WARNING
Skin Injection Hazard
To reduce the risk of a fluid injection injury,
always follow the Pressure Relief Proce-
dure on page 18, before removing or
installing the spray tip, air cap, or tip guard.
1. Relieve the pressure.
2. Place the spray tip (4) in the air cap (40), aligning
the tab on the tip with the groove in the air cap. Be
careful not to damage the electrode (40a).
40a
Fig. 10. Install Spray Tip
309298J
40
01995
4
3. Install the spray tip and air cap, tip guard (3), shroud
(2), and retaining ring (1) onto the gun. Be sure the
electrode (40a) is in place. Tighten the retaining ring
firmly.
WARNING
Fire, Explosion, and Electric Shock Hazard
To reduce the risk of fire, explosion, or elec-
tric shock, never operate the gun with a
damaged electrode.
2
40
3
1a
1
Fig. 11. Install Air Cap Assembly
Operation
TI1717A
19