1. Important safety information regarding the placement of this
device is provided on page 89. Please review it before
proceeding.
2. Make sure that power to all the devices you will be connecting
up have been turned off. You must unplug the power cords of
any computers that have the Keyboard Power On function.
Rack Mounting
For convenience and flexibility, the CN-6000 can be mounted on a system
rack. To rack mount the unit do the following:
1. Using the screws provided with this package, screw the mounting bracket
into the top or bottom of the unit as shown in the diagram below.
Hardware Setup
Phillips hex head
M3 x 8
Chapter 2
7